|
20ft OCL Type
The unit has flat end panels which lle directly on top of the floor to become load bearing. Thus it acts as a flush folding flatrack but has a clear flat cargo deck Internal height is better than a Type (4) and seven units fold into 8ft 6in. This is one of 20 patent designs exclusive to CSA licensees.
The end walls are removable and can be laid for use as a loading ramp for tyred vehicles up to 1.5 tonne axle load.
The tare weight is low and the payload can be increased to high level making this a highly versatile works horse at low cost
Worldwide Spare Parts
As worldwide leaders in flatrack technology the all important spare parts are available as thy have been for more than 20 years.
Patents
Please do not encourage copying of the patented structures and components.
Typical Lashings and Interfacing
| Stanchions | 4 Sockets per side size 85mm
| | Lashing Bars | 8 x 5000kg per side 2 per end | Floor
| 45mm softwood planks 6mm gaps
| | Fork Pockets | 115 x 360mm | | Twistlocks | 1 Piece forged lift element 30°stainless steel defent
| | Header Locks | 2 per end semi automatic | | Corner Locking | Hammer Locked conical pin | | Counterbalancing | Leaf spring | | Approvals | ABS, LRS, BV, UIC, CSC, TCT |
Typical Dimensions | External | mm | ft | In | | Length | 6058 | 19' | 10.5" | | Width | 2438 | 8' | 0" | | Height | 2591 | 8' | 6" | | Folded | 370 | 1' | 2.5" | | 7 Into 8ft6 in |
Internal
| mm
| ft
| In
| | Wall Panel to Panel | 12050 | 39' | 6.5" | Nud - Post to Post
| 5638
| 18'
| 6"
| | Platform Width | 2226 | 7' | 3.6" | | Width Between Stanchions | 2270 | 7' | 5.5" |
| Typical Ratings | Kg | lb | | Tare Weight | 2560 | 5640 | | Payload | 27920 | 61560 | | Gross | 30480 | 67200 | | Load Over 2m | 20000 | 44092 | | Stacking | 9 high at 2400kg |
The Flatrack Features
- Use a platform flat when folded
- Floor clear of recess over full length
- Removable and walls for vehicle loading
- Walls can be laid at loading ramps
- Spare parts available worldwide
|
